# Can A Light Bulb Be A Resistor?

Lightbulb is a load, sometimes your load is not Resistive so you can use it as a Resistor. A load is a piece of electronics. There are resistance, impedance, and both in a circuit. There is resistance to a light bulb.

## Can a light bulb be considered a resistor?

The reason a light bulb lights up is that electricity is forced through a resistors. Light and heat are released into the air. A conductor and a Resistor are not the same thing.

## Can the light bulb be accurately modeled as only a resistor?

LEDs don’t have a linear relationship between current and voltage so they can’t be modeled as simply as a resistors.

## How does a light bulb use resistance?

A 100 watt lamp has a typical cold resistance of around 9. If the resistance stayed the same with 120 V applied, the bulb would draw about 12.5 Amps and use about 1,500 watt of power. The resistance is about 15 times the cold resistance at 120V.

## What makes a light bulb a non-ohmic resistor?

The light bulb is non-ohmic because of its high temperature burning. The LEDs are non-ohmic because of their structure. The copper attachment wires provide heat to the leds.

## What is the resistance of an LED bulb?

The forward voltage drop and the required 10 to 20mA for the LEDs will be detailed in the device’s data sheet. An ultra bright blueLED with a 9V battery has a forward voltage of 2.2V and a typical current of 20mA. The resistance needs to be as close to the ground as possible.

## Is a switch a resistor?

The switch can be labeled with a current arrow and a voltages depending on whether it is a 0 or infinite resistance.

## How do I know what resistor to use?

A rule of thumb is to find a resistor with more power than the one you are looking for. The most standard ones are 250 mW Resistors. If you have the right power rating, you can use the cheapest Resistor.

## Why use a resistor with an LED?

An electronic device emits light when an electric current is present. Excess current that can burn out the LEDs can be prevented with the use of the ballast resistors. If the source of the power is the same as the drop of the light, there is no need for a transformer.

## Do incandescent bulbs need a resistor?

It’s probably the most simple way to do it because it doesn’t have to be a resistors. These problems can be overcome with the integrated circuitry of the light bulbs. The old-fashioned light bulbs are not the same as the new ones.

## What is resistor and resistance?

The flow of electrons can be restricted by resistance. Resistance is not the same as current. Resistance is divided into two parts, the first being the R and the second being the ohm. Resistive devices are designed to produce resistance. Limit current, divide voltage, or generate heat are some of the ways in which transistors can be used.

As an Amazon Associate I earn from qualifying purchases.