The number of lights is dependent on the size of the pool. One light is required for the 15′ x 30′ pools. Two lights are required for the 20′ x 40′ pool. The 20′ x 42′ pools need at least three lights.
Where should pool lights be placed?
The lights should be placed at a uniform depth of 9 to 12 inches below the water line. If the lights need to be placed on a step or bench, there is a chance of an exception. There are lights beneath the waterline.
Do I need lights in my pool?
How many lights do I need to illuminate my home? One light, at a minimum, will illuminate a pool up to 30′ long, but it depends on the type of light and how bright it is. Two lights are required for pools that are 30′ long.
How many lumens does my pool need?
A minimum of three footcandles (30 lux) of illumination will be provided at the pool water surface and the pool wet deck surface. 10 lm per square foot of pool water surface area is the minimum amount of underwater lighting that can be used.
Are LED pool lights worth the money?
If you use the same amount of energy as a comparable incandescent light, you’ll save 75%. Your cost savings won’t start until you recover the additional money you spent on the LEDs, and that’s because the cost of the lights is more.
How far down should pool lights be?
The lights should be installed at a maximum depth of 300mm from the top of the pool, as steps and ledges are usually installed at a depth of 540mm. Above the bench height, there are lights that illuminate the area.
How much does it cost to install pool light?
Depending on the size of the light, it can cost between $450 and $650 to install. The cost for the smaller lights is between $300 and $500. The cost of a full-size pool light is between $450 and $650.
Why are pool LED lights so expensive?
It takes a lot of money to get sales people to go to all the different pool stores. You’re not paying for a better bulb, you’re paying for expensive overhead and multiple mouths to feed when you buy a bulb.
Can I add lights to my inground pool?
Yes, it is technically correct. It’s possible to add pool lights to your existing pool, but it’s also possible that your pool needs to be renovated, which can take a lot of work. It is possible to combine the need for lights with the need for a pool refresh in an older pool.
How much does it cost to run LED pool lights?
Assuming a maximum consumption of 42 watt per hour and an average electricity rate of 10 cents per kilowatt-hour, a pool light can cost up to 0.44 cents a day to run. The cost is less than using the same lights for $1 per day.
Do you have to drain a pool to change the light?
The water doesn’t usually need to be drained. The electrical cable is sealed so water won’t get into the conduit when the bulb is being replaced.
How much do LED pool lights cost to run?
500 watt pool light bulbs cost about a dollar a day to run, and if used often it can add up to hundreds of dollars in electrical expense each year. The Color Splash light uses less energy and costs less than $10 a year.
How many lights should an inground pool have?
The number of lights is dependent on the size of the pool. Only one light is required for the 15′ x 30′ pools. Two lights are required for the 20′ x 40′ pool. The 20′ x 42′ pools need at least three lights.
Is it safe to put string lights over a pool?
Mike the Poolman is the owner of a pool cleaning and maintenance service.