How do I synchronize my pool lights?
Wait between 11 and 14 seconds and turn the switch back on if you want to re-synce your lights. When the lights come back on, enter program #1 and you will be synchronized.
Why won’t my pool lights work?
If the breaker that your pool light is on has tripped, you can reset it by turning it off and plugging it back in. It’s possible that you have a bad breaker if that doesn’t work. Resetting the outlets on the pool light circuit is a good idea.
How do I sync my SR Smith pool lights?
Simply press the button once and wait 15 seconds for the lights to change. During this time, the lights will flash on and off several times, then reset to color mode 1 after pausing in the off mode.
Why won’t my pool lights change color?
Some pool lights that change colors rely on small motor that rotates a multicolored lens so different parts of the lens can’t see the light coming from a single bulb. The lights are susceptible to motor failure, which will allow them to function normally but with no color change.
How do LED pool lights work?
Swimming pools have a lot of Light Emitting Diode (LED) lights in them. The light comes from the semi-conductor which emits light rather than from the burning filaments in the light bulbs. Plug them into the power source and they will work.
How many lights should you put in a pool?
How many lights do I need to illuminate my home? Depending on the size of your pool, the amount of lights you need is dependent on it. Two is the minimum recommendation for large pools. It is possible to illuminate a pool with one light, but two may be better.
How far apart should pool lights be?
The maximum distance a light can travel is not always the same as the length of the pool. The wall facing away from the house should have lights evenly spread out. Every 8ft and 4ft from the end of the pool are where the lights should be placed.
Does lightning strike swimming pools?
It is possible for lightning to travel through metal wires and bars. It could happen to you, that’s what it sounds like. There have been no reports of fatal lightning strikes at indoor swimming pools. There was nothing!
How do I turn my pool lights on?
A traditional ON/OFF switch is the most popular way to control your pool light. The switch can be flipped up or down to turn it on or off.
What happens if water gets into pool light?
It doesn’t mean that the light is leaking, but it does mean that the lamp gasket has failed and water is leaking into the bulb.